Vulkan Logo

    21. Fixed-Function Vertex Processing

    Vertex fetching is controlled via configurable state, as a logically distinct graphics pipeline stage.

    21.1. Vertex Attributes

    Vertex shaders can define input variables, which receive vertex attribute data transferred from one or more VkBuffer(s) by drawing commands. Vertex shader input variables are bound to buffers via an indirect binding where the vertex shader associates a vertex input attribute number with each variable, vertex input attributes are associated to vertex input bindings on a per-pipeline basis, and vertex input bindings are associated with specific buffers on a per-draw basis via the vkCmdBindVertexBuffers command. Vertex input attribute and vertex input binding descriptions also contain format information controlling how data is extracted from buffer memory and converted to the format expected by the vertex shader.

    There are VkPhysicalDeviceLimits::maxVertexInputAttributes number of vertex input attributes and VkPhysicalDeviceLimits::maxVertexInputBindings number of vertex input bindings (each referred to by zero-based indices), where there are at least as many vertex input attributes as there are vertex input bindings. Applications can store multiple vertex input attributes interleaved in a single buffer, and use a single vertex input binding to access those attributes.

    In GLSL, vertex shaders associate input variables with a vertex input attribute number using the location layout qualifier. The Component layout qualifier associates components of a vertex shader input variable with components of a vertex input attribute.

    GLSL example
    // Assign location M to variableName
layout (location=M, component=2) in vec2 variableName;

// Assign locations [N,N+L) to the array elements of variableNameArray
layout (location=N) in vec4 variableNameArray[L];

    In SPIR-V, vertex shaders associate input variables with a vertex input attribute number using the Location decoration. The Component decoration associates components of a vertex shader input variable with components of a vertex input attribute. The Location and Component decorations are specified via the OpDecorate instruction.

    SPIR-V example
                   ...
          %1 = OpExtInstImport "GLSL.std.450"
               ...
               OpName %9 "variableName"
               OpName %15 "variableNameArray"
               OpDecorate %18 BuiltIn VertexIndex
               OpDecorate %19 BuiltIn InstanceIndex
               OpDecorate %9 Location M
               OpDecorate %9 Component 2
               OpDecorate %15 Location N
               ...
          %2 = OpTypeVoid
          %3 = OpTypeFunction %2
          %6 = OpTypeFloat 32
          %7 = OpTypeVector %6 2
          %8 = OpTypePointer Input %7
          %9 = OpVariable %8 Input
         %10 = OpTypeVector %6 4
         %11 = OpTypeInt 32 0
         %12 = OpConstant %11 L
         %13 = OpTypeArray %10 %12
         %14 = OpTypePointer Input %13
         %15 = OpVariable %14 Input
               ...

    21.1.1. Attribute Location and Component Assignment

    The Location decoration specifies which vertex input attribute is used to read and interpret the data that a variable will consume.

    When a vertex shader input variable declared using a 16- or 32-bit scalar or vector data type is assigned a Location, its value(s) are taken from the components of the input attribute specified with the corresponding VkVertexInputAttributeDescription::location. The components used depend on the type of variable and the Component decoration specified in the variable declaration, as identified in Input attribute components accessed by 16-bit and 32-bit input variables. Any 16-bit or 32-bit scalar or vector input will consume a single Location. For 16-bit and 32-bit data types, missing components are filled in with default values as described below.

    If an implementation supports storageInputOutput16, vertex shader input variables can have a width of 16 bits.

    Table 21. Input attribute components accessed by 16-bit and 32-bit input variables
    16-bit or 32-bit data type Component decoration Components consumed

    scalar

    0 or unspecified

    (x, o, o, o)

    scalar

    1

    (o, y, o, o)

    scalar

    2

    (o, o, z, o)

    scalar

    3

    (o, o, o, w)

    two-component vector

    0 or unspecified

    (x, y, o, o)

    two-component vector

    1

    (o, y, z, o)

    two-component vector

    2

    (o, o, z, w)

    three-component vector

    0 or unspecified

    (x, y, z, o)

    three-component vector

    1

    (o, y, z, w)

    four-component vector

    0 or unspecified

    (x, y, z, w)

    Components indicated by “o” are available for use by other input variables which are sourced from the same attribute, and if used, are either filled with the corresponding component from the input format (if present), or the default value.

    When a vertex shader input variable declared using a 32-bit floating point matrix type is assigned a Location i, its values are taken from consecutive input attributes starting with the corresponding VkVertexInputAttributeDescription::location. Such matrices are treated as an array of column vectors with values taken from the input attributes identified in Input attributes accessed by 32-bit input matrix variables. The VkVertexInputAttributeDescription::format must be specified with a VkFormat that corresponds to the appropriate type of column vector. The Component decoration must not be used with matrix types.

    Table 22. Input attributes accessed by 32-bit input matrix variables
    Data type Column vector type Locations consumed Components consumed

    mat2

    two-component vector

    i, i+1

    (x, y, o, o), (x, y, o, o)

    mat2x3

    three-component vector

    i, i+1

    (x, y, z, o), (x, y, z, o)

    mat2x4

    four-component vector

    i, i+1

    (x, y, z, w), (x, y, z, w)

    mat3x2

    two-component vector

    i, i+1, i+2

    (x, y, o, o), (x, y, o, o), (x, y, o, o)

    mat3

    three-component vector

    i, i+1, i+2

    (x, y, z, o), (x, y, z, o), (x, y, z, o)

    mat3x4

    four-component vector

    i, i+1, i+2

    (x, y, z, w), (x, y, z, w), (x, y, z, w)

    mat4x2

    two-component vector

    i, i+1, i+2, i+3

    (x, y, o, o), (x, y, o, o), (x, y, o, o), (x, y, o, o)

    mat4x3

    three-component vector

    i, i+1, i+2, i+3

    (x, y, z, o), (x, y, z, o), (x, y, z, o), (x, y, z, o)

    mat4

    four-component vector

    i, i+1, i+2, i+3

    (x, y, z, w), (x, y, z, w), (x, y, z, w), (x, y, z, w)

    Components indicated by “o” are available for use by other input variables which are sourced from the same attribute, and if used, are either filled with the corresponding component from the input (if present), or the default value.

    When a vertex shader input variable declared using a scalar or vector 64-bit data type is assigned a Location i, its values are taken from consecutive input attributes starting with the corresponding VkVertexInputAttributeDescription::location. The Location slots and Component words used depend on the type of variable and the Component decoration specified in the variable declaration, as identified in Input attribute locations and components accessed by 64-bit input variables. For 64-bit data types, no default attribute values are provided. Input variables must not use more components than provided by the attribute.

    Table 23. Input attribute locations and components accessed by 64-bit input variables
    Input format Locations consumed 64-bit data type Location decoration Component decoration 32-bit components consumed

    R64

    i

    scalar

    i

    0 or unspecified

    (x, y, -, -)

    R64G64

    i

    scalar

    i

    0 or unspecified

    (x, y, o, o)

    scalar

    i

    2

    (o, o, z, w)

    two-component vector

    i

    0 or unspecified

    (x, y, z, w)

    R64G64B64

    i, i+1

    scalar

    i

    0 or unspecified

    (x, y, o, o), (o, o, -, -)

    scalar

    i

    2

    (o, o, z, w), (o, o, -, -)

    scalar

    i+1

    0 or unspecified

    (o, o, o, o), (x, y, -, -)

    two-component vector

    i

    0 or unspecified

    (x, y, z, w), (o, o, -, -)

    three-component vector

    i

    unspecified

    (x, y, z, w), (x, y, -, -)

    R64G64B64A64

    i, i+1

    scalar

    i

    0 or unspecified

    (x, y, o, o), (o, o, o, o)

    scalar

    i

    2

    (o, o, z, w), (o, o, o, o)

    scalar

    i+1

    0 or unspecified

    (o, o, o, o), (x, y, o, o)

    scalar

    i+1

    2

    (o, o, o, o), (o, o, z, w)

    two-component vector

    i

    0 or unspecified

    (x, y, z, w), (o, o, o, o)

    two-component vector

    i+1

    0 or unspecified

    (o, o, o, o), (x, y, z, w)

    three-component vector

    i

    unspecified

    (x, y, z, w), (x, y, o, o)

    four-component vector

    i

    unspecified

    (x, y, z, w), (x, y, z, w)

    Components indicated by “o” are available for use by other input variables which are sourced from the same attribute. Components indicated by “-” are not available for input variables as there are no default values provided for 64-bit data types, and there is no data provided by the input format.

    When a vertex shader input variable declared using a 64-bit floating-point matrix type is assigned a Location i, its values are taken from consecutive input attribute locations. Such matrices are treated as an array of column vectors with values taken from the input attributes as shown in Input attribute locations and components accessed by 64-bit input variables. Each column vector starts at the Location immediately following the last Location of the previous column vector. The number of attributes and components assigned to each matrix is determined by the matrix dimensions and ranges from two to eight locations.

    When a vertex shader input variable declared using an array type is assigned a location, its values are taken from consecutive input attributes starting with the corresponding VkVertexInputAttributeDescription::location. The number of attributes and components assigned to each element are determined according to the data type of the array elements and Component decoration (if any) specified in the declaration of the array, as described above. Each element of the array, in order, is assigned to consecutive locations, but all at the same specified component within each location.

    Only input variables declared with the data types and component decorations as specified above are supported. Two variables are allowed to share the same Location slot only if their Component words do not overlap. If multiple variables share the same Location slot, they must all have the same SPIR-V floating-point component type or all have the same width scalar type components.

    21.2. Vertex Input Description

    Applications specify vertex input attribute and vertex input binding descriptions as part of graphics pipeline creation by setting the VkGraphicsPipelineCreateInfo::pVertexInputState pointer to a VkPipelineVertexInputStateCreateInfo structure.

    The VkPipelineVertexInputStateCreateInfo structure is defined as:

    // Provided by VK_VERSION_1_0
typedef struct VkPipelineVertexInputStateCreateInfo {
    VkStructureType                             sType;
    const void*                                 pNext;
    VkPipelineVertexInputStateCreateFlags       flags;
    uint32_t                                    vertexBindingDescriptionCount;
    const VkVertexInputBindingDescription*      pVertexBindingDescriptions;
    uint32_t                                    vertexAttributeDescriptionCount;
    const VkVertexInputAttributeDescription*    pVertexAttributeDescriptions;
} VkPipelineVertexInputStateCreateInfo;

    • sType is a VkStructureType value identifying this structure.

    • pNext is NULL or a pointer to a structure extending this structure.

    • flags is reserved for future use.

    • vertexBindingDescriptionCount is the number of vertex binding descriptions provided in pVertexBindingDescriptions.

    • pVertexBindingDescriptions is a pointer to an array of VkVertexInputBindingDescription structures.

    • vertexAttributeDescriptionCount is the number of vertex attribute descriptions provided in pVertexAttributeDescriptions.

    • pVertexAttributeDescriptions is a pointer to an array of VkVertexInputAttributeDescription structures.

    Valid Usage

    • VUID-VkPipelineVertexInputStateCreateInfo-vertexBindingDescriptionCount-00613
      vertexBindingDescriptionCount must be less than or equal to VkPhysicalDeviceLimits::maxVertexInputBindings

    • VUID-VkPipelineVertexInputStateCreateInfo-vertexAttributeDescriptionCount-00614
      vertexAttributeDescriptionCount must be less than or equal to VkPhysicalDeviceLimits::maxVertexInputAttributes

    • VUID-VkPipelineVertexInputStateCreateInfo-binding-00615
      For every binding specified by each element of pVertexAttributeDescriptions, a VkVertexInputBindingDescription must exist in pVertexBindingDescriptions with the same value of binding

    • VUID-VkPipelineVertexInputStateCreateInfo-pVertexBindingDescriptions-00616
      All elements of pVertexBindingDescriptions must describe distinct binding numbers

    • VUID-VkPipelineVertexInputStateCreateInfo-pVertexAttributeDescriptions-00617
      All elements of pVertexAttributeDescriptions must describe distinct attribute locations

    Valid Usage (Implicit)

    • VUID-VkPipelineVertexInputStateCreateInfo-sType-sType
      sType must be VK_STRUCTURE_TYPE_PIPELINE_VERTEX_INPUT_STATE_CREATE_INFO

    • VUID-VkPipelineVertexInputStateCreateInfo-pNext-pNext
      pNext must be NULL

    • VUID-VkPipelineVertexInputStateCreateInfo-flags-zerobitmask
      flags must be 0

    • VUID-VkPipelineVertexInputStateCreateInfo-pVertexBindingDescriptions-parameter
      If vertexBindingDescriptionCount is not 0, pVertexBindingDescriptions must be a valid pointer to an array of vertexBindingDescriptionCount valid VkVertexInputBindingDescription structures

    • VUID-VkPipelineVertexInputStateCreateInfo-pVertexAttributeDescriptions-parameter
      If vertexAttributeDescriptionCount is not 0, pVertexAttributeDescriptions must be a valid pointer to an array of vertexAttributeDescriptionCount valid VkVertexInputAttributeDescription structures

    // Provided by VK_VERSION_1_0
typedef VkFlags VkPipelineVertexInputStateCreateFlags;

    VkPipelineVertexInputStateCreateFlags is a bitmask type for setting a mask, but is currently reserved for future use.

    Each vertex input binding is specified by the VkVertexInputBindingDescription structure, defined as:

    // Provided by VK_VERSION_1_0
typedef struct VkVertexInputBindingDescription {
    uint32_t             binding;
    uint32_t             stride;
    VkVertexInputRate    inputRate;
} VkVertexInputBindingDescription;

    • binding is the binding number that this structure describes.

    • stride is the byte stride between consecutive elements within the buffer.

    • inputRate is a VkVertexInputRate value specifying whether vertex attribute addressing is a function of the vertex index or of the instance index.

    Valid Usage

    • VUID-VkVertexInputBindingDescription-binding-00618
      binding must be less than VkPhysicalDeviceLimits::maxVertexInputBindings

    • VUID-VkVertexInputBindingDescription-stride-00619
      stride must be less than or equal to VkPhysicalDeviceLimits::maxVertexInputBindingStride

    Valid Usage (Implicit)

    • VUID-VkVertexInputBindingDescription-inputRate-parameter
      inputRate must be a valid VkVertexInputRate value

    Possible values of VkVertexInputBindingDescription::inputRate, specifying the rate at which vertex attributes are pulled from buffers, are:

    // Provided by VK_VERSION_1_0
typedef enum VkVertexInputRate {
    VK_VERTEX_INPUT_RATE_VERTEX = 0,
    VK_VERTEX_INPUT_RATE_INSTANCE = 1,
} VkVertexInputRate;

    • VK_VERTEX_INPUT_RATE_VERTEX specifies that vertex attribute addressing is a function of the vertex index.

    • VK_VERTEX_INPUT_RATE_INSTANCE specifies that vertex attribute addressing is a function of the instance index.

    Each vertex input attribute is specified by the VkVertexInputAttributeDescription structure, defined as:

    // Provided by VK_VERSION_1_0
typedef struct VkVertexInputAttributeDescription {
    uint32_t    location;
    uint32_t    binding;
    VkFormat    format;
    uint32_t    offset;
} VkVertexInputAttributeDescription;

    • location is the shader input location number for this attribute.

    • binding is the binding number which this attribute takes its data from.

    • format is the size and type of the vertex attribute data.

    • offset is a byte offset of this attribute relative to the start of an element in the vertex input binding.

    Valid Usage

    • VUID-VkVertexInputAttributeDescription-location-00620
      location must be less than VkPhysicalDeviceLimits::maxVertexInputAttributes

    • VUID-VkVertexInputAttributeDescription-binding-00621
      binding must be less than VkPhysicalDeviceLimits::maxVertexInputBindings

    • VUID-VkVertexInputAttributeDescription-offset-00622
      offset must be less than or equal to VkPhysicalDeviceLimits::maxVertexInputAttributeOffset

    • VUID-VkVertexInputAttributeDescription-format-00623
      The format features of format must contain VK_FORMAT_FEATURE_VERTEX_BUFFER_BIT

    Valid Usage (Implicit)

    • VUID-VkVertexInputAttributeDescription-format-parameter
      format must be a valid VkFormat value

    To bind vertex buffers to a command buffer for use in subsequent drawing commands, call:

    // Provided by VK_VERSION_1_0
void vkCmdBindVertexBuffers(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    firstBinding,
    uint32_t                                    bindingCount,
    const VkBuffer*                             pBuffers,
    const VkDeviceSize*                         pOffsets);

    • commandBuffer is the command buffer into which the command is recorded.

    • firstBinding is the index of the first vertex input binding whose state is updated by the command.

    • bindingCount is the number of vertex input bindings whose state is updated by the command.

    • pBuffers is a pointer to an array of buffer handles.

    • pOffsets is a pointer to an array of buffer offsets.

    The values taken from elements i of pBuffers and pOffsets replace the current state for the vertex input binding firstBinding + i, for i in [0, bindingCount). The vertex input binding is updated to start at the offset indicated by pOffsets[i] from the start of the buffer pBuffers[i]. All vertex input attributes that use each of these bindings will use these updated addresses in their address calculations for subsequent drawing commands.

    Valid Usage

    • VUID-vkCmdBindVertexBuffers-firstBinding-00624
      firstBinding must be less than VkPhysicalDeviceLimits::maxVertexInputBindings

    • VUID-vkCmdBindVertexBuffers-firstBinding-00625
      The sum of firstBinding and bindingCount must be less than or equal to VkPhysicalDeviceLimits::maxVertexInputBindings

    • VUID-vkCmdBindVertexBuffers-pOffsets-00626
      All elements of pOffsets must be less than the size of the corresponding element in pBuffers

    • VUID-vkCmdBindVertexBuffers-pBuffers-00627
      All elements of pBuffers must have been created with the VK_BUFFER_USAGE_VERTEX_BUFFER_BIT flag

    • VUID-vkCmdBindVertexBuffers-pBuffers-00628
      Each element of pBuffers that is non-sparse must be bound completely and contiguously to a single VkDeviceMemory object

    • VUID-vkCmdBindVertexBuffers-pBuffers-04001
      If the nullDescriptor feature is not enabled, all elements of pBuffers must not be VK_NULL_HANDLE

    Valid Usage (Implicit)

    • VUID-vkCmdBindVertexBuffers-commandBuffer-parameter
      commandBuffer must be a valid VkCommandBuffer handle

    • VUID-vkCmdBindVertexBuffers-pBuffers-parameter
      pBuffers must be a valid pointer to an array of bindingCount valid or VK_NULL_HANDLE VkBuffer handles

    • VUID-vkCmdBindVertexBuffers-pOffsets-parameter
      pOffsets must be a valid pointer to an array of bindingCount VkDeviceSize values

    • VUID-vkCmdBindVertexBuffers-commandBuffer-recording
      commandBuffer must be in the recording state

    • VUID-vkCmdBindVertexBuffers-commandBuffer-cmdpool
      The VkCommandPool that commandBuffer was allocated from must support graphics operations

    • VUID-vkCmdBindVertexBuffers-bindingCount-arraylength
      bindingCount must be greater than 0

    • VUID-vkCmdBindVertexBuffers-commonparent
      Both of commandBuffer, and the elements of pBuffers that are valid handles of non-ignored parameters must have been created, allocated, or retrieved from the same VkDevice

    Host Synchronization

    • Host access to commandBuffer must be externally synchronized

    • Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized

    Command Properties
    Command Buffer Levels Render Pass Scope Supported Queue Types Command Type

    Primary
    Secondary

    Both

    Graphics

    State

    Alternatively, to bind vertex buffers, along with their sizes and strides, to a command buffer for use in subsequent drawing commands, call:

    // Provided by VK_VERSION_1_3
void vkCmdBindVertexBuffers2(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    firstBinding,
    uint32_t                                    bindingCount,
    const VkBuffer*                             pBuffers,
    const VkDeviceSize*                         pOffsets,
    const VkDeviceSize*                         pSizes,
    const VkDeviceSize*                         pStrides);

    • commandBuffer is the command buffer into which the command is recorded.

    • firstBinding is the index of the first vertex input binding whose state is updated by the command.

    • bindingCount is the number of vertex input bindings whose state is updated by the command.

    • pBuffers is a pointer to an array of buffer handles.

    • pOffsets is a pointer to an array of buffer offsets.

    • pSizes is NULL or a pointer to an array of the size in bytes of vertex data bound from pBuffers.

    • pStrides is NULL or a pointer to an array of buffer strides.

    The values taken from elements i of pBuffers and pOffsets replace the current state for the vertex input binding firstBinding + i, for i in [0, bindingCount). The vertex input binding is updated to start at the offset indicated by pOffsets[i] from the start of the buffer pBuffers[i]. If pSizes is not NULL then pSizes[i] specifies the bound size of the vertex buffer starting from the corresponding elements of pBuffers[i] plus pOffsets[i]. All vertex input attributes that use each of these bindings will use these updated addresses in their address calculations for subsequent drawing commands.

    This command also dynamically sets the byte strides between consecutive elements within buffer pBuffers[i] to the corresponding pStrides[i] value when the graphics pipeline is created with VK_DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE set in VkPipelineDynamicStateCreateInfo::pDynamicStates. Otherwise, strides are specified by the VkVertexInputBindingDescription::stride values used to create the currently active pipeline.

    Note

    Unlike the static state to set the same, pStrides must be between 0 and the maximum extent of the attributes in the binding.
    Valid Usage

    • VUID-vkCmdBindVertexBuffers2-firstBinding-03355
      firstBinding must be less than VkPhysicalDeviceLimits::maxVertexInputBindings

    • VUID-vkCmdBindVertexBuffers2-firstBinding-03356
      The sum of firstBinding and bindingCount must be less than or equal to VkPhysicalDeviceLimits::maxVertexInputBindings

    • VUID-vkCmdBindVertexBuffers2-pOffsets-03357
      If pSizes is not NULL, all elements of pOffsets must be less than the size of the corresponding element in pBuffers

    • VUID-vkCmdBindVertexBuffers2-pSizes-03358
      If pSizes is not NULL, all elements of pOffsets plus pSizes must be less than or equal to the size of the corresponding element in pBuffers

    • VUID-vkCmdBindVertexBuffers2-pBuffers-03359
      All elements of pBuffers must have been created with the VK_BUFFER_USAGE_VERTEX_BUFFER_BIT flag

    • VUID-vkCmdBindVertexBuffers2-pBuffers-03360
      Each element of pBuffers that is non-sparse must be bound completely and contiguously to a single VkDeviceMemory object

    • VUID-vkCmdBindVertexBuffers2-pBuffers-04111
      If the nullDescriptor feature is not enabled, all elements of pBuffers must not be VK_NULL_HANDLE

    • VUID-vkCmdBindVertexBuffers2-pStrides-03362
      If pStrides is not NULL each element of pStrides must be less than or equal to VkPhysicalDeviceLimits::maxVertexInputBindingStride

    • VUID-vkCmdBindVertexBuffers2-pStrides-06209
      If pStrides is not NULL each element of pStrides must be either 0 or greater than or equal to the maximum extent of all vertex input attributes fetched from the corresponding binding, where the extent is calculated as the VkVertexInputAttributeDescription::offset plus VkVertexInputAttributeDescription::format size

    Valid Usage (Implicit)

    • VUID-vkCmdBindVertexBuffers2-commandBuffer-parameter
      commandBuffer must be a valid VkCommandBuffer handle

    • VUID-vkCmdBindVertexBuffers2-pBuffers-parameter
      pBuffers must be a valid pointer to an array of bindingCount valid or VK_NULL_HANDLE VkBuffer handles

    • VUID-vkCmdBindVertexBuffers2-pOffsets-parameter
      pOffsets must be a valid pointer to an array of bindingCount VkDeviceSize values

    • VUID-vkCmdBindVertexBuffers2-pSizes-parameter
      If pSizes is not NULL, pSizes must be a valid pointer to an array of bindingCount VkDeviceSize values

    • VUID-vkCmdBindVertexBuffers2-pStrides-parameter
      If pStrides is not NULL, pStrides must be a valid pointer to an array of bindingCount VkDeviceSize values

    • VUID-vkCmdBindVertexBuffers2-commandBuffer-recording
      commandBuffer must be in the recording state

    • VUID-vkCmdBindVertexBuffers2-commandBuffer-cmdpool
      The VkCommandPool that commandBuffer was allocated from must support graphics operations

    • VUID-vkCmdBindVertexBuffers2-bindingCount-arraylength
      If any of pSizes, or pStrides are not NULL, bindingCount must be greater than 0

    • VUID-vkCmdBindVertexBuffers2-commonparent
      Both of commandBuffer, and the elements of pBuffers that are valid handles of non-ignored parameters must have been created, allocated, or retrieved from the same VkDevice

    Host Synchronization

    • Host access to commandBuffer must be externally synchronized

    • Host access to the VkCommandPool that commandBuffer was allocated from must be externally synchronized

    Command Properties
    Command Buffer Levels Render Pass Scope Supported Queue Types Command Type

    Primary
    Secondary

    Both

    Graphics

    State

    21.3. Vertex Input Address Calculation

    The address of each attribute for each vertexIndex and instanceIndex is calculated as follows:

    • Let attribDesc be the member of VkPipelineVertexInputStateCreateInfo::pVertexAttributeDescriptions with VkVertexInputAttributeDescription::location equal to the vertex input attribute number.

    • Let bindingDesc be the member of VkPipelineVertexInputStateCreateInfo::pVertexBindingDescriptions with VkVertexInputAttributeDescription::binding equal to attribDesc.binding.

    • Let vertexIndex be the index of the vertex within the draw (a value between firstVertex and firstVertex+vertexCount for vkCmdDraw, or a value taken from the index buffer plus vertexOffset for vkCmdDrawIndexed), and let instanceIndex be the instance number of the draw (a value between firstInstance and firstInstance+instanceCount).

    • Let offset be an array of offsets into the currently bound vertex buffers specified during vkCmdBindVertexBuffers or vkCmdBindVertexBuffers2 with pOffsets.

    • Let stride be the member of VkPipelineVertexInputStateCreateInfo::pVertexBindingDescriptions->stride unless there is dynamic state causing the value to be ignored. In this case the value is set from the last value from one of the following

      • vkCmdBindVertexBuffers2EXT::pStride, if not NULL

    bufferBindingAddress = buffer[binding].baseAddress + offset[binding];

if (bindingDesc.inputRate == VK_VERTEX_INPUT_RATE_VERTEX)
    effectiveVertexOffset = vertexIndex * stride;
else
    effectiveVertexOffset = instanceIndex * stride;

attribAddress = bufferBindingAddress + effectiveVertexOffset + attribDesc.offset;

    21.3.1. Vertex Input Extraction

    For each attribute, raw data is extracted starting at attribAddress and is converted from the VkVertexInputAttributeDescription’s format to either floating-point, unsigned integer, or signed integer based on the numeric type of format. The numeric type of format must match the numeric type of the input variable in the shader. The input variable in the shader must be declared as a 64-bit data type if and only if format is a 64-bit data type. If format is a packed format, attribAddress must be a multiple of the size in bytes of the whole attribute data type as described in Packed Formats. Otherwise, attribAddress must be a multiple of the size in bytes of the component type indicated by format (see Formats). For attributes that are not 64-bit data types, each component is converted to the format of the input variable based on its type and size (as defined in the Format Definition section for each VkFormat), using the appropriate equations in 16-Bit Floating-Point Numbers, Unsigned 11-Bit Floating-Point Numbers, Unsigned 10-Bit Floating-Point Numbers, Fixed-Point Data Conversion, and Shared Exponent to RGB. Signed integer components smaller than 32 bits are sign-extended. Attributes that are not 64-bit data types are expanded to four components in the same way as described in conversion to RGBA. The number of components in the vertex shader input variable need not exactly match the number of components in the format. If the vertex shader has fewer components, the extra components are discarded.